KA-M20S Dual Pocket V-mount Batteries Hot Swap Plate
1/4

KA-M20S Dual Pocket V-mount Batteries Hot Swap Plate

$199.00
Quantity
Sku : KA-M20S
Barcode : 6948193507491

Description

›  Fit 2x PB-M Pocket V-mount Batteries

›  Low power device: Hot swap mode

›  High power device: High load mode

›  Power indictors and hot swap indicators

›  SONY&RED power info display

›  Provide 2x D-tap sockets

›  Slim and light weight, balanced install

›  Multiple protection circuit

Pocket V-mount Batteries Extender

Hot swap application

KA-M20S is an extender plate for SWIT Pocket V-mount Batteries. Installed with 2x PB-M series batteries, the size is equivalent to a standard large capacity V-mount battery, and the KA-M20S plate can draw the 2 batteries one-by-one as hot swap mode, or use together as high load mode.

Two Power Modes

Hot Swap mode and High Load mode

When the device power consumption is less than single PB-M battery Max load (150W), the KA-M20S would be “Hot Swap mode” – 2 batteries one-by-one using, and the free battery can be changed any time.
When the device power consumption is more than single PB-M battery Max load (150W), the KA-M20S would be “High Load mode” – 2 batteries using together, and none of the batteries can be removed.
The Hot Swap mode and High Load mode can be automatically switched according to current power consumption of the device.

Power/Hot Swap Indicators

There’re independent power indicators for both batteries. The flashing of top power LED indicates this battery is discharging. And the flashing of EMPTY LED means this battery is empty and need to change in time.

2 D-tap Power Output

There’re 2 D-tap sockets on the top side and right side of the KA-M20S plate, for flexible connection to various cameras.

Warranty Terms

Monitor

We provide 2 years conditional warranty for monitors (1 year for LCD panel).

 

The following damages/issues are not covered under warranty: 

(1) Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorization of SWIT.
(2) The number of bright or dark spots of the LCD panel shall conform to the standard regulated by SWIT. (Check User Manual for details)
(3) Any damage caused by powering the monitor with third-party power adaptors.
(4) Any damage of LCD panel caused by external forces.
(5) Any damage caused by irresistible factors (such as earthquake, fire, lightning etc.) or human factors.
(6) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.

Video Transmitter

We provide 1 year conditional warranty for Wireless video and converters.

The following damages/issues are not covered under warranty: 

(1) Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorization of SWIT.
(2) The attenuation of signal quality resulting from being used in any special environments.
(3) Any damage caused by powering the product with third-party power adaptors.
(4) Any damage caused by irresistible factors (such as earthquake, fire, lightning etc.) or human factors.
(5) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.

Battery

We provide 2 years conditional warranty for V-mount/Gold Mount batteries, 

and 1 year conditional warranty for DV and NP-1 batteries.

The following damages/issues are not covered under warranty: 

(1) Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorization of SWIT.
(2) Battery performance declines, cannot be charged, or cannot be fully charged that caused by using third-party chargers.
(3) Battery capacity naturally decreased after a certain cycle times of charging and discharging.
(4) The capacity loss caused by over 6-month’s storage, and not charging the battery to re-active it during the period.
(5) Any damage caused by irresistible factors (such as earthquake, fire, lightning etc.) or human factors.
(6) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.

Charger & Adaptor

We provide 2 years conditional warranty for battery chargers and power adaptors 

The following damages/issues are not covered under warranty: 

(1) Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorization of SWIT.
(2) Damage caused by input voltage beyond the limited range of AC 100V-240V.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning etc.) or human factors.
(4) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.

Light

We provide 1 year conditional warrant for light products.

The following damages/issues are not covered under warranty: 

(1) Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual's instructions, or disassemble, repair without authorization of SWIT.

(2) Any damage caused by powering the product with third-party power adaptors.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning etc.) or human factors.
(4) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.