ET-N80 NDI EFP Intercom Control Panel
1/4

ET-N80 NDI EFP Intercom Control Panel

$1,699.00
$1,799.00
-$100.00
Quantity
Sku : ET-N80
Weight : 1.5kg

Description


Intercom Control Panel of NDI® EFP System

ET-N80 is the Intercom Control Panel of SWIT NDI® EFP Multi-camera Production System at director’s side. The Intercom Control Panel can bind with 8 camera adaptors (both HD and 4K versions) and supports link connection for more channels, and with only 1x RJ45 cable connected into the NDI® network.

Full Duplex Intercom

The ET-N80 Intercom control panel supports full duplex intercom between director and cameramen. The director can select camera numbers and communicate with each cameraman, and select ANN button to make annoucement to everyone.

Front Control

The ET-N80 provides a 5-pin headset and a swan-neck microphone, to connect into the front panel, and switchable between the headset and microphone. You can select camera channel, adjust volume, turn off the mic, or mute all the channels, directly by the buttons.

Rear Interfaces

The ET-N80 is connected into NDI® network simply by an RJ45 cable. Set up IP address or rebundle with new camera adaptors by webserver configuration page. The Voice Link port is to serial connect more units, or connect with 3rd party intercom system.

4-wire External Intercom System Connect

If you are using other intercom system like Clear-Com, you can connect this intercom control panel to clearcom through the 4-wire port, and press the link button to take over Clear-Com channels.

Headset

 5-pin XLR ×1

Microphone

3-pin XLR ×1

LAN connection

RJ45 ×1

Link connection

RJ45 ×1 (4-wire)

AC Input

100-240V, 0.5A

DC Input

11-17V, 1.5A

Power Consumption

16W
     Working Temperature 0-40°C
     Dimension

482.6×164.4×44.5mm

Net weight

 1.5kg

Warranty Terms

Monitor

We provide 2 years conditional warranty for monitors (1 year for LCD panel).

 

The following damages/issues are not covered under warranty: 

(1) Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorization of SWIT.
(2) The number of bright or dark spots of the LCD panel shall conform to the standard regulated by SWIT. (Check User Manual for details)
(3) Any damage caused by powering the monitor with third-party power adaptors.
(4) Any damage of LCD panel caused by external forces.
(5) Any damage caused by irresistible factors (such as earthquake, fire, lightning etc.) or human factors.
(6) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.

Video Transmitter

We provide 1 year conditional warranty for Wireless video and converters.

The following damages/issues are not covered under warranty: 

(1) Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorization of SWIT.
(2) The attenuation of signal quality resulting from being used in any special environments.
(3) Any damage caused by powering the product with third-party power adaptors.
(4) Any damage caused by irresistible factors (such as earthquake, fire, lightning etc.) or human factors.
(5) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.

Battery

We provide 2 years conditional warranty for V-mount/Gold Mount batteries, 

and 1 year conditional warranty for DV and NP-1 batteries.

The following damages/issues are not covered under warranty: 

(1) Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorization of SWIT.
(2) Battery performance declines, cannot be charged, or cannot be fully charged that caused by using third-party chargers.
(3) Battery capacity naturally decreased after a certain cycle times of charging and discharging.
(4) The capacity loss caused by over 6-month’s storage, and not charging the battery to re-active it during the period.
(5) Any damage caused by irresistible factors (such as earthquake, fire, lightning etc.) or human factors.
(6) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.

Charger & Adaptor

We provide 2 years conditional warranty for battery chargers and power adaptors 

The following damages/issues are not covered under warranty: 

(1) Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorization of SWIT.
(2) Damage caused by input voltage beyond the limited range of AC 100V-240V.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning etc.) or human factors.
(4) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.

Light

We provide 1 year conditional warrant for light products.

The following damages/issues are not covered under warranty: 

(1) Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual's instructions, or disassemble, repair without authorization of SWIT.

(2) Any damage caused by powering the product with third-party power adaptors.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning etc.) or human factors.
(4) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.